TA450
﹛﹛﹛
PA Technical Parameter of TA series
PA model TA450
8次 stereo power 450W℅2
4次 stereo power 680W℅2
2次 stereo power 850W℅2
8次 bridge mono channel power 1200W
4次 bridge mono channel power 1500W
Frequency response range 20Hz-20KHz+0/-0.3dB
Total harmonic distortion <0.02%@8次1KHz
Signal to clutter ratio ≡100dB
Conversion rate 60V/us
Damping coefficient ≡500@8次
Separation ≡60dB@8次1KHz
Input resistance balance: 20K次; unbalance: 10K次
Input sensitivity 0.775V 1.0V 1.4
LPF 20HZ - 180HZ
HPF 130HZ - 20KHZ
Installed height 2U
Machine size WDH(mm) 483x448x88
Net weight 27Kg
PA Function of TA series
Creation of rectifier bridge by high current, ensures high current of power supply unimpededly to enhance system stability. Adoption independent shielded , mo, , de high voltage part of power supply, minimize interference power on signal, to improve security of electricity.
Adopting European Toshiba pipe of best stability and performance as PA pipe, makes the system can endure a larger current, to get better dynamic and security.
Carry out rigorous testing and screening of each pair of power tubes, to ensure consistency and minimal distortion of PA.
Adopt prior processing method of taking point from main board directly, obtaining more clean, stable and adequate voltage, to make the sound clearer and more enriched.
Scientific and rational wiring design, reduces interface among input, output and channel greatly.
Adopting professional design, with low pass filter selection and signal resection with band pass, makes it convenient for users.
Adopting 8 10000uf electric capacity as power supply achieves higher power reserves. |
